Water leaks are the scourge of every homeowner, and they are not all as obvious as we’d like them to be. Dripping taps are relatively easy to fix, yet sometimes a pipe or joint can erode and a seeping stream of water will slowly engulf the plaster on the wall or perhaps the ceiling, which is just the start of the problem. Leak detection is a specialised area of plumbing, and they have their own techniques to source leaks, and here are some of the things a plumber wouldn’t tell you about leak detection.
Check the Meter
This is a failsafe way to find out if there is a water leak in your property, and involves making sure that all the faucets are turned off. Then take a meter reading, and do the same in 15 minutes, and if the readings are exactly the same, there is no water leak in your system. If there is a slight difference, with the second reading being a little higher, then there is water seepage occurring somewhere. If you live in Western Australia, and are looking for leak detection in Perth, there are online plumbers that use the latest technology, and can soon source any leak.
Bathroom Tile Leaks
These occur primarily because the grouting has been compromised and water is seeping into the wall. Signs to look for include,
- Loose tiles
- Stains on the ceiling
If you have this problem, check all grouting for wear or damage, and repair as necessary. Failing that, you could call out a plumber, and if you happen to be in WA, PlumbDog are the ideal choice, and with their state-of-the-art leak detection systems, any leak will soon be sourced.
Often, the seal between the panel and the wall becomes worn and water begins to seep through the joint. This can be remedied with silicone, but first make sure you have located the leak, then clean and dry the area thoroughly on both sides before applying the silicone.
Sink Rim Leaks
The seal between the sink and the wall behind it is usually either grouted or silicon sealed, and the easiest way to determine if there is a leak is to open the cabinet under the sink and watch the area with a flashlight while another person pours water over the join. Any water coming through will be easily seen and once you pinpoint the source, you can make the repairs.
These occur in kitchens and bathrooms at the slip joints of the waste pipes, which are usually hidden behind a wall or boxed area, and if not addressed promptly, it can cause significant damage to walls, ceilings, and floors. To test a drainage system, fill the sink with water, then pull the plug and take a dry tissue and rub it around the joints as the water is passing through. If there are any leaks, the tissue will soon become moist.
Monitoring for water leaks is a wise thing to do, as early detection saves on repair costs, and if you do happen to spot a leak, call in a plumber who can quickly fix it for you.